SALES : 020 8672 3515
Handy and strong, this distancemeter measures the distances up to 30 meters with a precision of +/- 2 mm.
All your projects can be now measured in a fraction of second. Agatec DM100 proposes the basic functions of a distancemeter, as:
- The taking of measure.
- The automatic calculation of vomumes and surfaces.
- The calculation of perimeter.
* Use a target plate to increase the measurement range during daylight or if the target has poor reflection properties!
** in favourable conditions (good target surface properties, room temperature) up to 10 m. In unfavourable conditions, such as intense sunshine, poorly reflecting target surface or high temperature variations, the deviation over distances above 10 m can increase by ± 0.15 mm/m.
- Laying parquet, carpet
- General distance measurements
- Checking plans
|Range||0.10m to 30 m ( 0.33 ft to 100 ft)|
|Measuring accuracy (2 σ)||typically ± 2mm**|
|Laser type||635 nm, < 1 mW|
|Protection against splashes and dust||IP 4X|
|Battery life,||up to 3 000 measurements|
|Type||2 x AAA|
|LCD Display||2 lines|
|Dimension||115 x 47 x 27 mm|
|Temperature range: Storage||-25°C to +70°C|
|Operation||0°C to +40°C|